LiCuO battery "The Penny" available in either AA or AAA sizes, can safely and consistently deliver a full 1.5 volts. A perfect solution for all of your portable electronics with a hermetic glass to metal sealing and superior drain capacity. Even after a year of cold storage it doesn't lose more than 3 percent of total capacity.
Primary AA, AAA, AAAA Battery
Lithium Copper Oxide
1Ah, 1.7Ah, 4Ah
ɸ8.5×42.5mm, ɸ10.5×45mm, ɸ14.5x50.5mm
Low self-discharge rate(<3% after 1 year stored at 20˚C)
Superior Drain Capacity
Hermetic Glass-to-Metal Sealing
Portable Electronic Devices
LiCuO battery "The Penny" available in either AA or AAA sizes, can safely and consistently deliver a full 1.5 volts. A perfect solution for all of your portable electronics with a hermetic glass to metal sealing and superior drain capacity. Even after a year of cold storage it doesn't lose more than 3 percent of total capacity.
APS-R6-AA, APS-LR03-3A, APS-LR08425-4A
GENERAL – THE FOLLOWING TERMS AND CONDITIONS APPLY TO ALL PURCHASE ORDERS, CONTRACTS, QUOTATIONS, SHIPMENTS, AND SALES ISSUED TO AUTEC POWER SYSTEMS AS SELLER.
THESE TERMS AND CONDITIONS SHALL BE APPLICABLE WHETHER OR NOT THEY ARE ATTACHED TO OR ENCLOSED WITH THE GOODS TO BE SOLD. THESE TERMS AND CONDITIONS MAY IN SOME SITUATIONS BE DIFFERENT FROM OR CONFLICT WITH THE TERMS AND CONDITIONS CONTAINED IN A PURCHASE ORDER, ORDER BLANK, OR TERMS SPECIFIED BY A BUYER; ACCEPTANCE BY THE SELLER OF ANY ORDER IS EXPRESSLY CONDITIONED ON BUYER’S ACCEPTANCE OF SELLER’S TERMS AND CONDITIONS HEREIN. BUYER MAY ACCEPT BY WRITTEN ACKNOWLEDGMENT OF THESE TERMS AND CONDITIONS OR BY IMPLICATION OR COURSE OF CONDUCT (ACCEPTANCE OF OR PAYMENT FOR GOODS ORDERED). THE BEFORE-MENTIONED ACTIONS CONCLUSIVELY CONSTITUTE ACCEPTANCE OF THESE TERMS AND CONDITIONS. THE SELLER MUST SPECIFICALLY AGREE TO CHANGES TO THESE TERMS AND CONDITIONS IN WRITING BEFORE THEY ARE BINDING.
SPECIFICATIONS – ALL PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SELLER CANNOT BE HELD LIABLE FOR ERRORS OR OMISSIONS OR THE CONSEQUENCES THEREOF.
ORDERS AND CONFIRMATION – All orders are subject to product availability and acceptance by Seller. All orders must have scheduled delivery dates. Any purchase order with a balance that is unscheduled will be subject to Seller’s standard lead-time. Product in stock in the U.S. and available for delivery may be shipped within 24 hours after receipt of order. Seller’s lead-time to deliver products not in stock is usually twelve (12) weeks after acceptance of order by Seller. If product is in stock and available for sale, Seller will either ship the product directly, or send a written confirmation to the Buyer. In the event that product is not in stock, Seller will provide Buyer with a written notification of the delivery schedule, and Buyer may cancel within ten (10) days of receipt of such notice. If customer accepts the new delivery date, Autec Power will then provide written confirmation of acceptance.
MINIMUM ORDER – A minimum amount of US$250.00 per order is required; a $25.00 dollar service charge will be added for orders under the minimum amount to cover processing expenses, if Seller chooses to accept such order.
SCHEDULING ORDERS: (STANDARD PRODUCTS) – Standard Products scheduled to ship within a seventy (70) day window from original ship date on P.O. are non-cancelable. Products scheduled to ship within a 30-70 day window may be rescheduled. All standard products must be taken within three (3) months of the original scheduled date. Once an originally scheduled date is rescheduled, it may not be rescheduled again.
SCHEDULING ORDERS: (MODIFIED OR CUSTOM PRODUCTS) – Modified or Custom Products built in accordance of customer’s written specifications scheduled to ship within a ninety (90) day window from date of request are non-cancelable. Products scheduled to ship within a 60-90 day window from date of request may be rescheduled. All modified or custom products must be taken within three months of the scheduled date. Once an originally scheduled date is rescheduled, it may not be rescheduled again. Any uniquely purchased materials required to produce a Modified or a Custom Product is the responsibility of the customer in the event of a cancellation.
PRICES – Prices in general are dependent on volume of the particular items purchased, terms of payment and the credit worthiness of the Buyer, and are subject to change without prior notice. Prices quoted by Seller are not subject to revision or reduction by Buyer. Each shipment is considered a separate and independent transaction.
VOLUME PRICING – Scheduled orders must be shipped in full over a 12-month period. If the amount scheduled by the customer and delivered by Seller within this period is less than the amount ordered, or if cancellation occurs, a bill-back invoice will be issued reflecting the difference in volume price between the quantities ordered and the quantity delivered.
TAXES – All applicable present and future sales, revenue, excise or other tax under this order shall be added to the purchase price and shall be paid by Buyer, unless Buyer provides Seller with a tax exemption certificate acceptable to the taxing authorities.
PAYMENT TERMS – All sales are cash upon delivery unless otherwise agreed in writing. In the event that Seller has the products ready to ship, but the shipment is delayed by Buyer, payments become due on the date Seller is prepared to make shipment, not when shipment is actually made. Domestic (U.S.) buyers who desire credit terms shall send an email Request for Credit to Seller, showing three (3) trade references and bank account information, to Seller’s accounting department prior to product being shipped on NET terms. Until and unless such credit request has been approved, all orders will be shipped C.O.D. / company check (or cashiers’ check as determined by Seller’s Accounting Department). Once credit is approved, payment terms are NET 30 days from the date of shipment. There may be some instances where, although the customer is credit worthy, NET 30 terms will not be an option, due to the low price being offered – in those cases Seller’s written confirmation of order shall control. For international accounts the terms of payment may be cash-in-advance, bank-to-bank wire transfer or irrevocable letter of credit. Any other method of payment will require prior approval by Seller. In the event Buyer fails to pay any sum when due, or if there are grounds that would lead a reasonable merchant to doubt the Buyer’s ability to pay, Seller may decline to make further deliveries except upon receipt of cash or satisfactory security for payment. As a strong incentive for timely payment of all invoices (and not to provide any form of financing or time payments), Seller applies a late payment charge of 1.5% per month on all overdue balances. Buyer agrees that it is impractical and extremely difficult to calculate actual damages to Sellers due to the late payment by a delinquent Buyer. Buyer agrees that the late charge above is reasonable under the circumstances. Collection expenses and legal fees incurred in the collection of overdue balances will be paid by the delinquent Buyer. This sale is conditioned on the provision that all disputes related thereto must be resolved in Ventura County, California, and all legal actions must only be brought in Ventura County, California, and the parties waive all claims of impropriety of personal jurisdiction, venue and/or forum non-convenience. If Seller prevails, Buyer shall pay all costs of litigation incurred by Seller, including but not limited to attorney fees and court costs. California law shall apply to the construction and interpretation of these terms and conditions, and all dealings between the Buyer and the Seller.
SHIPMENT – All shipping costs, and insurance, as applicable, shall be added to the purchase price and shall be paid by the Buyer. Unless otherwise instructed by Buyer, Seller will exercise its own judgment in the method of shipment.
HEADINGS – All headings are for convenience purposes only, and do not form part of these Terms and Conditions of Sale.
RISK OF LOSS – All sales are F.O.B. Seller’s warehouse, unless otherwise agreed in writing. As a convenience for Buyers, but not extending Seller’s risk of loss, on goods shipped “Freight Pre-Paid,” Seller may elect to purchase insurance coverage the goods until they are release to the Buyer by the freight carrier. The invoice shall include cost of goods, shipping and insurance. Further, if the Buyer refuses insurance coverage on a Freight Pre-paid shipment, the product will be shipped Freight Collect; unless a waiver is signed by Buyer releasing Seller, it’s agents and the freight carriers from all responsibility. In all situations Seller’s liability as to the delivery ceases upon making delivery of the goods to the carrier at the Seller’s warehouse in good condition, and the Buyer bears all risk of loss thereafter. The freight carriers act as Buyer’s agent. All claims of damages must be filed with the carrier only. Goods held for the Buyer are at the risk and expense of Buyer. All Buyers should procure adequate insurance at their own expense to protect their interest in the goods.
SERVICE & SUPPORT – Please contact the seller’s technical support staff with questions regarding problems with the goods before returning any of the goods. It may only be a minor problem, which can be fixed without returning the goods.
CLAIMS – No claim of any kind, as to goods received or delivery of goods in respect to which damages are claimed and failure to give notice of claim within ninety (90) days from the date of delivery shall constitute a waiver by Buyer of all claims in respect to such goods. No charge or expense incident to any claims shall be the responsibility of Seller except with Seller’s prior written authorization. Goods shall not be returned to Seller without Seller’s prior permission, and then only in the manner prescribed by Seller. No claim shall be allowable if the goods have been modified in any manner.
RETURN PROCEDURE – Buyer must follow the following procedure to return defective goods: (1) Buyer must notify Seller in writing within the warranty period of any defect or nonconformance in the goods, by completing Seller’s Return Merchandise Information Sheet (RMIS), and provide proof of purchase for the goods (e.g. invoice with matching serial numbers); (2) Buyer must obtain authorization and an RMA number from Seller to return the defective goods; (3) the goods must be received by Seller within fifteen (15) days after return material authorization is given by the Seller; and (4) Buyer must pay all shipping costs. Additionally, acceptance of returned goods are subject to Seller’s examination of such goods, to verify that the defect or nonconformance or difficulty was not in any way caused by the negligence, improper installation, misuse or unauthorized repair of the goods. Seller may refuse acceptance of returned goods that do not follow this procedure.
LIMITED WARRANTY – Seller warrants its products against defects in materials and workmanship for a period for two (2) years for all product except for the LED Drivers then it is five (5) years, from the date of invoice; during this warranty period, and further subject to the return and other policies stated herein, Seller will repair or replace products that prove to be defective. Replacement is with a functionally similar unit, and there is no assurance that the same unit will be available at time of replacement. Seller shall have no responsibility for products out of warranty, but may accept such for repairs at the sole risk of Buyer, at the going labor rate of Seller, plus parts and shipping, if the necessary parts are still available. This warranty is voided and there is no warranty of any kind, if the product has been damaged by accident, misuse, neglect, or abuse by anyone other than the Seller; or if it has been altered or repaired by anyone other than the Seller. Buyer’s sole remedy in the event that the product proves defective, and Sellers’ liability in any event, is limited to the repair or replacement of the product proven defective. Under no circumstances shall Seller be liable for any loss or damage, whether direct or indirect, incidental, consequential, special or otherwise, arising out of or relating to the use of, or the inability to use the product, in excess of the cost of replacement of any product proven defective during the warranty period.
DISCLAIMER OF OTHER WARRANTY – THERE IS NO WARRANTY THAT EXTENDS BEYOND THE DESCRIPTION STATED ABOVE. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE. THIS WARRANTY IS ALSO IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON SELLER’S PART, AND IT NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR THE SELLER ANY OTHER LIABILITIES. THIS DOCUMENT DESCRIBES BUYER’S SOLE AND EXCLUSIVE REMEDY FOR ANY CLAIM RELATING TO THE GOODS.
CANCELLATION – Upon acceptance by Seller, an order shall not be canceled or modified by Buyer without the prior written consent of Seller. In the event such orders or the related specifications are modified, the costs occasioned thereby shall be added to the purchase price. If the Buyer cancels an order, and the order covers items or parts that are specially made to the Buyer’s specifications, the Buyer shall pay immediately for such items, parts or materials therefor, if already procured OR completed by Seller as of the date of cancellation. If Buyer for any reason fails to take delivery, Buyer shall make payment as though delivery had been made and Seller may store such goods for Buyer’s account and at Buyers’ expense and risks. Seller also further reserves all claims for damages and other remedies, upon cancellation of any order or breach of these terms and conditions by Buyer. Seller shall be entitled, in the event of bankruptcy or insolvency of Buyer, or in the event any proceeding is brought against Buyer under bankruptcy or insolvency laws, to cancel any order then outstanding and receive reimbursement for Seller’s losses as a result of the cancellation.
FORCE MAJEURE – Seller shall not be liable for any replacement costs, delay, or non-delivery, and/or any damages (compensatory, restitution, consequential, exemplary, etc.) if these are in any way due to causes beyond Seller’s reasonable control. These causes include but are not limited to acts of God, acts of civil or military authority, priorities, fires, strikes, lockouts, slowdowns, factory or labor conditions, errors in manufacture and inability due to causes beyond Seller’s reasonable control to obtain necessary labor, materials or manufacturing. In the event of such a delay in the delivery date, at the request of the Seller, a period equal to the time lost by the delay shall be deferred for the shipment period.
INDEMNITY – To the extent that the products sold here under are furnished to Buyer’s specifications, Buyer shall indemnify and hold Seller harmless against any loss, damage, or liability which results from any claim brought by third parties, and Buyer agrees to defend any cause of action in which such infringement is alleged, upon receipt of notice of such action.
SEVERABILITY – If any term or condition of sale is held invalid, illegal or unenforceable in any jurisdiction, such term or condition shall be deemed severed from the rest of these terms and conditions in that jurisdiction. The legality, validity and enforceability of the remaining terms and conditions shall not in any way be affected or impaired.
INTEGRATION – Acceptance of this agreement constitutes the entire agreement between the parties hereto with respect to the subject matter hereof and supersedes all previous negotiations, and agreements.
This Site is Copyright © 2019 Autec Power Systems and it’s affiliates. All rights reserved.
By accessing, visiting, or otherwise using the Site, you agree to be bound by the Terms.
Your Use of Our Site
When using our Site, you must always comply with Autec Power Systems’ Acceptable Use Policy. For the purposes of these Terms, “Services” means Site and “You” means you.
You must also comply with all applicable laws, including federal, state, and local laws, the laws of your jurisdiction, and laws regarding the transmission of technical data.Autec Power Systems’ Privacy Statement describes how we will protect your privacy and handle your personal information when using our Site. By using the Site, you agree that Autec Power Systems can use such information in accordance with this policy.
Do not use the Site to advertise, promote, endorse, or market, directly or indirectly, any third party commercial products, services, solutions, or other technologies.
In order to access certain services or features of our Site, you may be required to create an account, profile, or download Autec Power Systems software. We may also offer access to certain services and features of the Site to you for a fee. In those situations, or when using other Autec Power Systems products and services as part of the Site, additional Autec Power Systems terms or requirements may apply and those additional terms become part of your agreement with us. In the event of any conflict between such additional terms and these Terms, the additional terms control.
If you violate these Terms, your access to the Site may be terminated immediately and without notice.
If any portion of the Site requires you to open an account or create a user profile, the information you provide must be truthful and accurate. You agree not to use the account, username, or password of another user at any time or to disclose your password to any third party. You must notify Autec immediately of any unauthorized use of your account or of any breach in security.
We may, in our sole discretion, (i) reject or remove anything you post, (ii) restrict, suspend, or terminate your access to any or all of the Site, or (iii) cease to provide and maintain the Site, at any time, for any or no reason, with or without prior notice, and without liability. Upon doing so, we may retain or delete any information or content that you provided.
Our Site Content
Our Site contains content owned, operated, licensed, and/or controlled by Autec Power Systems that is protected by copyright, trademark, trade secret, or other proprietary rights (“Site Content”). Autec Power Systems or its licensors retain all rights in such Site Content. Autec Power Systems grants you a limited, revocable, non-sublicensable right to view the Site Content solely for your internal use of the Site. Additionally, certain Site Content may include, but is not limited to, icons, photographs, white papers, product documentation, technology overviews, and implementation guides. These materials may be used under limited circumstances in strict accordance with our Copyright Use Policies and Guidelines, including our Web Use Guidelines.
The trademarks, logos, and service marks (“Marks”) displayed on our Site are the property of Autec Power Systems or other third parties. Autec Power Systems is a registered trademark of Autec Power Systems and/or its affiliates. Autec Power Systems Marks may be used under limited circumstances in strict accordance with our Trademark Guidelines. Otherwise, you are not permitted to use these Marks without the prior written consent of Autec Power Systems or the third party that owns the Mark. To obtain a complete list of Autec Power Systems trademarks at contact us at email@example.com
We do not claim any ownership rights in any text, files, images, photos, video, sounds, software, works of authorship, or other materials that you upload or otherwise provide to our Site (collectively, “User Content”). However, you grant to Autec Power Systems a worldwide, royalty-free, sublicensable, perpetual, irrevocable license to use, modify, publicly perform, publicly display, reproduce, and distribute your User Content for the limited purpose of providing the Site and all related services. You also agree that any other user of this Site may access, view, store, and reproduce your User Content for such user’s personal use or otherwise in connection with use of the Site.You cannot post, modify, distribute, or reproduce in any way copyrighted or other proprietary materials without obtaining the prior written consent of the copyright owner of such materials. We may terminate an account and/or deny access to any user who is alleged to have infringed the copyright or proprietary rights of another.
All User Content is considered nonconfidential and public. Please do not submit any confidential or private information.
If you provide us with any feedback or ideas, you authorize Autec Power Systems to use your feedback for any purpose, without any restriction or limitation.
If you believe that your copyright or other rights have been infringed, please provide us written notice with the following information:
· An electronic or physical signature of the person authorized to act on behalf of the owner of the copyright or other interest
· A description of the copyrighted work or other work that you claim has been infringed
· A description of where the material that you claim is infringing is located on our sites, networks or other repositories
· Your address, telephone number, and email address
· A written statement by you that you have a good faith belief that the disputed use is not authorized by the copyright owner, its agent, or the law
· A statement by you, made under penalty of perjury, that the above information in your notice is accurate and that you are the copyright owner or authorized to act on the copyright owner’s behalf
If the disputed materials were posted by a third party identifiable through reasonable efforts, we will try to provide notice to the third party of the charge. If the third party responds, we will provide you with a copy so that you may take any other steps you may consider appropriate.
Disclaimers and Limitations of Liability
Except as specifically set forth above, nothing in these Terms confers, by implication, estoppel, or otherwise, any license or right under any trade secret, patent, trademark, copyright, or other intellectual property right of Autec Power Systems or any third party. All rights not expressly licensed are reserved.
Although we have attempted to provide accurate information on our Site, we assume no responsibility for the accuracy of the information.
We do not endorse or assume responsibility for user conduct or what users submit to our Site. Nothing in these Terms requires us to monitor the Site or to modify or remove any materials or information.
Our Site may contain links to third-party sites. We provide these links merely as a convenience and the inclusion of such links does not imply any endorsement of their content. Access to any other site linked to this Site is at your own risk and we are not responsible for the accuracy or reliability of any information, data, opinions, advice, or statements made on such sites.
You are solely responsible for maintaining the confidentiality of your account, registration, and password information. Autec Power Systems will not be liable for any harm caused by, or related to, the theft or misappropriation of your user name or password, disclosure of your user name or password, or your authorization of anyone else to use your user name or password.
We may change the programs or products mentioned at any time without notice. Mention of non-Autec Power Systems products or services is for informational purposes only and constitutes neither an endorsement nor a recommendation. Because international information is provided on our Site, not all products or programs mentioned will be available in your country. Please contact your local sales representative for information as to products and services available in your country.
The Site and all information on the Site are subject to applicable federal, state, and local laws, and U.S. export control laws, and may also be subject to the laws of the country where you reside. We reserve the right to investigate and take appropriate action against anyone who, in Autec Power Systems’ sole discretion, is suspected of violating any applicable law, including, without limitation, reporting you to law enforcement authorities.
Some of the information on our Site may contain projections or other forward-looking statements regarding future events or the future financial performance of Autec Power Systems. Such statements are only predictions and actual events or results may differ materially.
THIS SITE IS PROVIDED “AS IS” WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. TO THE EXTENT PERMITTED BY LAW, AUTEC POWER SYSTEMS DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT, OR THAT ARISE FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
AUTEC POWER SYSTEMS SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR REVENUES, COSTS OF REPLACEMENT GOODS, OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS SITE OR ANY RELATED SERVICES OR CONTENT, OR DAMAGES RESULTING FROM USE OF OR RELIANCE ON THE INFORMATION PRESENT, EVEN IF AUTEC POWER SYSTEMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
AUTEC POWER SYSTEMS DOES NOT GUARANTEE AND DOES NOT PROMISE ANY SPECIFIC RESULTS FROM USE OF THE SITE OR ANY RELATED SERVICES OR CONTENT.ALL USE OF THIS SITE IS AT YOUR OWN RISK.
About Our Terms
We reserve the right to change these Terms from time to time at our sole discretion. Please check this page periodically for any updates.
These Terms are governed by the laws of the State of California, U.S.A., excluding any conflict of laws rules or principles.
If there is any dispute relating to the Site or these Terms, you and Autec Power Systems agree to exclusive personal jurisdiction and venue in the state and federal courts of Los Angeles County, State of California, U.S.A.
If any provision of these Terms is found to be invalid or unenforceable, that provision will be struck and the remaining provisions will remain in full effect.
If you or others violate these Terms and we take no immediate action, this in no way limits or waives our rights, such as our right to take action in the future or in similar situations.
These terms were last updated on 05/5/2017 and are effective immediately.
Thank You for Visiting
This privacy notice discloses the online privacy practices for Autec Power Systems. This privacy notice applies solely to information collected by our company websites
www.PowerDoesIT.com or www.autec.com.
It will notify you of the following:
1. What personally identifiable information is collected from you through the website, how it is used and with whom it may be shared.
2. What choices are available to you regarding the use of your data.
3. The security procedures in place to protect the misuse of your information.
4. How you can correct any inaccuracies in the information.
Information Collection, Use, and Sharing We are the sole owners of the information collected on this site. We only have access to/collect information that you voluntarily give us via email or other direct contact from you. We will not sell or rent this information to anyone.
We will use your information to respond to you, regarding the reason you contacted us. We will not share your information with any third party outside of our organization, other than as necessary to fulfill your request, e.g. to ship an order.
Your Access to and Control Over Information You may opt out of any future contacts from us at any time. You can do the following at any time by contacting us via the email address or phone number given on our website:
· See what data we have about you, if any.
· Change/correct any data we have about you.
· Have us delete any data we have about you.
· Express any concern you have about our use of your data.
Security We take precautions to protect your information. When you submit sensitive information via the website, your information is protected both online and offline.
Wherever we need to collect sensitive information, that information will be encrypted and transmitted to us in a secure way. Our website URL will have the “lock” icon in the address bar and have “https” at the beginning of the address of the Web page.
While we use encryption to protect sensitive information transmitted online, we also protect your information offline. Only employees who need the information to perform a specific job (for example, billing or customer service) are granted access to personally identifiable information. The computers/servers in which we store personally identifiable information are kept in a secure environment.
Autec Power Systems warrants to the original purchaser that products supplied shall be free from defects in material and workmanship under normal use for a minimum period of 12 months from date of shipment. Additional Warranty Period options are available for Autec Power Systems products as agreed in writing by Autec Power Systems and our customer. Autec Power Systems will repair or, at its option, provide an equivalent item, or replace the defective product during the stated warranty period. This warranty applies only to the repair or replacement of the product and only when the product is properly handled, installed and maintained according to Autec Power Systems instructions. This warranty excludes defects resulting from improper handling, storage, installation, acts of God, fire, vandalism or civil disturbances. Purchaser must notify Autec Power Systems in writing within 14 days of noticing the defect. This warranty excludes field labor or service charges related to the repair or replacement of the product. The warranty contained herein shall not extend to any finished goods or spare parts from which any serial number has been removed or which have been damaged or rendered defective
(a) as a result of normal wear and tear, willful or accidental damage, negligence, misuse or abuse;
(b) due to water or moisture, lightning, windstorm, abnormal voltage, harmonic distortion, dust, dirt, corrosion or other external causes;
(c) by operation outside the specifications contained in the product technical datasheet;
(d) by the use of spare parts not manufactured or sold by Autec Power Systems by the connection or integration of other equipment or software not approved by Autec Power Systems unless the Customer provides acceptable proof to Autec Power Systems that the defect or damage was not caused by;
(e) by modification, repair or service by anyone other than Autec Power Systems, who has not applied for and been approved by Autec Power Systems to do such modification, repair or service unless the Customer provides acceptable proof Autec Power Systems that the defect or damage was not caused by the above;
(f) due to procedures, deviating from procedures specified by Autec Power Systems or
(g) due to failure to store, install, test, commission, maintain, operate or use finished goods and spare parts in a safe and reasonable manner and in accordance with Autec Power Systems instructions
(h) by repair or replacement of engines without factory training.
The warranty contained herein shall not apply to finished goods or spare parts which are sold “as is”, as “second-hand”, as used”, as “demo” or under similar qualifications or to Consumables (“Consumables” is defined as any part(s) of goods or part(s) for use with goods, which part(s) of goods or part(s) for use with goods are consumed during the operation of the goods and which part(s) of goods or part(s) for use with goods require replacement from time to time by a user such as, but not limited to, light bulbs). The warranty contained herein shall not apply, unless the total purchase price for the defective finished goods or spare parts has been paid by the due date for payment. The warranty contained herein applies only to the original purchaser and are not assignable or transferable to any subsequent purchaser or end-user. This warranty is subject to the shipment of the goods, within the warranty period, to the Autec Power Systems warranty returns department, by the purchaser, at the buyers’ expense. If no fault is found, Autec Power Systems will charge the purchaser for the subsequent return of the goods. Autec Power Systems reserves the right to change the warranty period without prior notice and without incurring obligation and expressly disclaims all warranties not stated in this limited warranty. Autec Power Systems medical-grade power supplies are not intended for use in life-support systems or end-use products. Please contact Autec Customer Service at firstname.lastname@example.org should you have any questions about our products or this Warranty Statement. Thank you for choosing Autec Power Systems.
Autec Power Systems has a longstanding policy of proactively working to ensure the actions we take to manufacture our products do not violate the laws or customs of the regions we do business in or impinge negatively on the rights of others.
With respect to the issue of “conflict minerals” it is Autec Power Systems policy to not intentionally or knowingly purchase products, components, or materials that contain conflict minerals. Also, we will strive to avoid contributing to conflicts through our sourcing practices.
To provide reasonable assurance compliance with this policy, Autec Power Systems is taking steps to ensure that the use of tin (cassiterite ore), tungsten (wolframite ore), tantalum (coltan ore), and gold, or their derivatives meets the United States enacted Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act.
We are pursuing due diligence measures and follow the EICC-GeSI (Electronic Industry Citizenship Coalition – Global e-Sustainability Initiative) due-diligence tools to communicate our policy to our suppliers. We request our suppliers be DRC (Democratic Republic of the Congo) conflict-free and source from smelters validated as compliant to a CFS (Conflict-Free Smelter) protocol using the CFS Compliant Smelter List.
We also require suppliers to provide a completed Conflict Minerals Reporting Template to provide reasonable assurance that the specified minerals are not being sourced from “Conflict Regions.”
Our efforts are not intended to ban the procurement of minerals from the DRC and adjoining countries, but provide reasonable assurance the specified minerals are obtained from responsible sources in the region. We ask our suppliers to work with us in our efforts to ensure we procure non-conflict minerals. We encourage our suppliers to responsibly source non-conflict minerals and derivative metals from the DRC and neighboring countries in order to prevent an embargo and associated worsening of economic conditions and human suffering.
Autec Power Systems expects our suppliers to:Source materials from DRC conflict-free resourcesComply with the Dodd-Frank Wall Street Reform and Consumer Protection Act and provide the “Conflict Mineral Reporting Template” and all necessary declarationsEstablish their own due-diligence program to ensure conflict-free supply chains
An American company founded in 1989, our team is here to support you with a power solution from our high-efficiency product line-up, or they will collaborate with you to custom design and manufacture the perfect power supply solution to meet your unique power requirements.